9
ENGLISH
INSTALLER
INSTALLER
HANDLING
Hold solar collectors at the points shown (A) to move them.
Lift and move the storage cylinder in a horizontal position.
Make sure that the slings and lifting gear used are suitable for
the weight.
A
A
A
A
a
Do not lift the solar collector by its water fittings.
a
Do not lift the storage cylinder by its water fittings.
b
Wear suitable personal protective equipment and use
suitable safety devices.
PREPARING FOR INSTALLATION
Select the best possible orientation for the solar collectors
(ideally facing south). Avoid positions that are shaded by
plants, trees, buildings or hills, etc. during the day.
Maintain the minimum distance (A) between the system and
the edge of the roof.
Remove all gravel and detritus from the surface on which the
system is to be installed.
The mounting kit must not be used to install other
superstructures. It is designed only for use with
T
solar water heating systems.
The installation of a solar water heating system modifies the
existing structure of the roof. Verify the suitability of all roof
elements and if necessary adapt them to avoid leaks or
damage by wind and/or snow loads.
> A
> A
TSOL CN S BLU 30°
U.M.
150/1 200/1 220/2 300/2 300/3
A
1
1
1,5
1,5
1
m
