background image

17

17

ENGLISH

 

 

Warnings

The text “AttE” is displayed together with the alert number.

The equipment is not locked out, but its functions may be lim-

ited (according to the alert).

Contact your local Technical Assistance Centre

Temporary or short-term shut-down

In the event of temporary or short-term shut-down (e.g. due to 

holidays), proceed as follows:

- Remove the power supply by setting the main switch 

of the equipment and the main switch of the system to 

"OFF".

- If there is a danger of frost, keep the system on. To re-

duce fuel consumption, set the heating set point to the 

minimum allowed value.

Preparing for extended periods of disuse

If the appliance is not going to be used for a long period of 

time, the following operations should be carried out:

set the main switch of the system to OFF and the main switch 

of the equipment to (0);

- close the fuel cock and heating circuit water cock.

Drain the central heating circuit if there is any risk of 

freezing.

Device cleaning and maintenance

Please remember that THE PERSON RESPONSIBLE FOR 

SYSTEM MANAGEMENT MUST ENSURE THAT PROFES-

SIONALLY QUALIFIED HEATING ENGINEERS UNDERTAKE 

PERIODIC MAINTENANCE AND COMBUSTION EFFICIENCY 

MEASUREMENTS.

T

’s Technical Assistance Centre is qualified to 

satisfy these legal requirements and can also provide useful 

information on MAINTENANCE PROGRAMMES designed to 

guarantee:

- Greater safety

- Compliance with applicable legislation

- Freedom from the risk of fines in the event of spot 

checks.

Regular maintenance is essential for the safety, efficiency and 

durability of the boiler.

Servicing is a legal requirement and must be performed at 

least once a year by a professionally qualified heating engi-

neer.

External cleaning

Clean the boiler’s casing panels and control panel with a soft 

cloth damped in soapy water.

To remove marks from the boiler casing, use a cloth damped in 

a 50% mix of water and denatured alcohol or a suitable clean-

ing product.

Wipe the boiler dry after cleaning it.

Do not use abrasive products, petrol or triethylene.

Annual cleaning

At least once a year, the user must have the boiler served by 

T

's Technical Assistance Service or by a qualified 

heating engineer.

Содержание ACQUAHOME R BLU





















Отзывы: