manualshive.com logo in svg

thermital 20109806, Руководство по установке и обслуживанию, Страница: 31 / 60

Поделиться
Скачать
thermital 20109806 Скачать руководство пользователя страница 31

31

ENGLISH

 

 

Menu settings

TEMPERATURE DISPLAY

Storage cylinder temperature display

Press the   key to display storage cylinder temperature.

The indicator in the key itself shows steady light. Temperature 

is expressed in degrees centigrade. The display can show val-

ues between 110°C and 10°C. The mode indicators show the 

current functioning mode and burner state. The display au-

tomatically returns to showing boiler temperature after 2 sec-

onds.

Boiler temperature display

To view boiler temperature, press the   key.

The indicator in the key itself shows steady light. Temperature 

is expressed in degrees centigrade. The display can show val-

ues between 110°C and 10°C. The mode indicators show the 

current functioning mode and burner state.

b 

If no key is pressed for two minutes, the system enters 

“low consumption” mode and the central section of the 

display flashes. Pressing any key restores the boiler tem-

perature display.

CHANGING THE FUNCTIONING MODE

You can only change the boiler’s functioning mode when the 

display is reading out either boiler or storage cylinder temper-

ature. Press the "mode key" repeatedly to scroll to the required 

functioning mode. The default setting is "Winter".

- In stand-by mode (with the   indicator lit) the boiler 

remains off unless settings activate the anti-frost or an-

ti-legionella function (if enabled)

- In summer mode (with the   indicator lit) the boiler 

responds only to requests for domestic hot water. The 

central heating system is switched off. This mode in-

dicator is continuously lit if the burner is running and 

flashes if the burner is shut down.

- In winter mode (with the   indicator lit) the boiler re-

sponds to heat requests from the domestic hot water 

and central heating systems. This mode indicator is 

continuously lit if the burner is running and flashes if the 

burner is shut down.

DISPLAYING AND CHANGING BOILER 

AND STORAGE CYLINDER SETPOINTS

Displaying and changing the boiler setpoint

Press the   key to display boiler temperature.

Содержание 20109806





























































Отзывы:

Нет отзывов