Thermia iTec, Пусконаладка

Страница: 22 / 52

If the flow in the circulation pumps need to be adjusted, see chapter Adaptation of the heating system.
The following settings are made in the MANUAL TEST menu. To activate MANUAL TEST, see description above. Use + or – to move up
and down in the menu.
N
The OPTIMUM function must be activated.
See "Activation of optimum (variable speed) pump" in the chapter
"Configuration of control system"
In the MANUAL TEST menu:
1. Use + or – to navigate to the CIRC. PUMP entry
▪
Press + to set circulation pump speed. Set a value between 30% and 100%.
▪
Check that the circulation pump is running by listening and/or placing a hand on the circulation pump.
2. Stop the circulation pump by setting the CIRC. PUMP value to 0.
Constant speed circulation pump
The constant speed circulation normally have three speed settings: Low (1), medium (2) and high (3). These settings are done directly on
the circulation pump. See circulation pump manual for further information.
The following settings are made in the MANUAL TEST menu. To activate MANUAL TEST, see description above. Use + or – to move up
and down in the menu.
In the MANUAL TEST menu:
1. Use + or – to navigate to the CIRC. PUMP entry.
▪
Press + start circulation pump system (1) .
▪
Press left arrow (<) once.
▪
Use + or – to navigate to the CIRC. PUMP entry.
▪
Press + to activate the circulation pump (1).
▪
Check that the circulation pump is running by listening and/or placing a hand on the circulation pump.
2. Stop the circulation pump by setting the CIRC. PUMP value to 0.
Commissioning iTec
VIJSR102 Thermia Värmepumpar
22