THERMEx HIT O Series, Руководство пользователя

Страница: 8 / 36

CONNECTION TO POWER SUPPLY
Before switching on power supply, make sure that EWH is filled with water!
Before connecting of water heater to power supply, make sure that its settings
correspond to specifications of the heater.
Water heater shall be earthed to ensure its safe operation.
Power outlet shall have grounding contact with earthing wire and be in a place
protected from moisture, or meet requirements not less than IPX4.
OPERATION AND MAINTENANCE
OPERATION
In the course of EWH operation user can adjust heating water temperature using
temperature adjustment knob located on the protective cover.
When water temperature exceeds the value of the +95° C temperature switch is
actuated shutting down the EWH. To bring device back into operation, press until clicking the
release pin under the EWH protective cover.
The indicator lamp indicates EWH modes on and off in the course of operation.
MAINTENANCE
Maintenance and timely replacement of magnesium anode are obligatory conditions for
long-term operation of EWH. Failure to comply with these requirements is grounds for
release from the warranty service. Maintenance and replacement of magnesium anode are
not part of the warranty of the manufacturer.
When performing maintenance condition of magnesium anode and scale on TÈH are
checked. At the same time residue that may accumulate in the bottom of the EWH is
removed.
Magnesium anode must be replaced at least once in 2 years. If water contains high
levels of chemical contaminants, the magnesium anode must be replaced more often.
Scaling at THE can result in its malfunction, that is not a warranty case, and its replacement
is not included in the warranty of the manufacturer and the seller. If there is scale on THE,
then it can be removed by using scale removing means or mechanically. When removing
residuals from EWH do not apply excessive force and do not use abrasive cleaners not to
damage the protective coating of the inner tank.
Importance of the first maintenance is that by intensity of scale and residues,
magnesium anode consumption terms for next maintenance services can be decided and,
consequently, service life can be extended. In case of non-observance of the above
requirements EWH service life reduces, increases the probability of EWH breakdown and
validity of warranty expires.