THERMEx HIT O Series, Руководство пользователя

Страница: 10 / 36

Powered EWH does
not heat water. No
backlights of indicator
lamps.
Thermal switch tripped or
not on.
Disconnect EWH from the
mains, remove EWH protective
cover, press the safety button
until you hear a click, place the
cover and turn on power.
These faults are not defects of EWH and shall be fixed by the consumer or by a
specialized organization at his own expense.
DISPOSAL
When complying with the rules of EWH installation, operation and maintenance and
when water quality complying with current standard the manufacturer sets EWH lifespan of 9
years.
When disposing of the EWH comply with local environmental laws and guidelines.
The manufacturer reserves the right to make changes to the design and specifications
of the heater without prior notice.
MANUFACTURER'S WARRANTY
The manufacturer sets 2 years as the period of warranty for water heater, and warranty
period for parts and components is as follows:

for water containing tank (inner tank)
–
5 years;

for other components (heating element, thermostat, indicator lights, gaskets,
temperature indicator, pressure relief valve)
–
2 years.
The warranty period is calculated from the date of EWH sale. If there is no or corrected
date of sale and shop stamp, the warranty period is calculated from the date of EWH
manufacture. Claims within the warranty period are accepted only on presentation of the
warranty card with marks of the seller, and the identification plate on the casing of the EWH.
EWH serial number consists of thirteen digits. The third and fourth digits of the serial number
are year of manufacture, the fifth and sixth digits - month of release, the seventh and eighth
digits - day of EWH release. Claims within the warranty period are accepted only on
presentation of the guarantee card with marks of the seller, and the identification plate on the
casing of the EWH.
The warranty shall apply to EWH only. Malfunction of relief valve or power line cord
shall not entail replacement of EWH. Responsibility for compliance with principles of
installation and connection shall be borne by the buyer (in case of connection by his own) or
by the installer carrying out connection.
Recurring maintenance and timely replacement of magnesium anode are compulsory
conditions for long operation of EWH and survival of warranty obligations of the
manufacturer.
The first replacement of magnesium anode shall be not later than 25 months from the
date of EWH installation (in case of no mark of installation in warranty certificate with the seal
in installation company, the term is calculated from the date of manufacture). Later