THERMEx Combi Inox IRP 150V, Руководство пользователя

Страница: 17 / 52

Technical Specifications
0,05 / 0,7 М P а
230/400 V ~ ,
50 Hz
6 000 W
3/4 "
Cold water line pressure, min/max
Supply network is three-phase (or single-phase),
voltage, frequency
Power of tubular electric heater (TEH)
Thread diameter of hot and cold water connection nozzles
Heat exchanger area
2
0,7 m
IPX4
0
+ 3 ...+ 40 С
0
+18…+74 С
±5
0
С
Water heater protection class
Operation at ambient temperature
Adjustment range of water heating temperature
Accuracy of storage temperature control
The manufacturer reserves the right to change the design and characteristics of the water heater
without prior notice.
Information concerning the application area and the method of determining the manufacture
date:
The release date of the product is encoded in a unique serial number located on the identification
plate (sticker) placed at the bottom of the product. The serial number of the product consists of
thirteen digits. The third and fourth digit of the serial number represent the year of issue, the fifth and
sixth – the month of release, the seventh and eighth
–
the day of the EWH release date.
Indication of security measures
1. All installation, plumbing, and electrical work shall be carried out by qualified personnel
only!
2. Electrical safety and anti-corrosion protection of the EWH are only guaranteed upon availability of
efficient grounding performed in accordance with the current Electrical Installation Regulations (EIR).
3. WHEN INSTALLING AND OPERATING THE EWH, IT SHALL BE FORBIDDEN TO:
џ
connect the power supply if the EWH is not filled with water;
џ
remove the protective cover when the power is on;
џ
use the EWH without grounding or use water pipes as grounding;
7
џ
plug the EWH in the water supply system with a pressure of more than 0, MPa. If the
pressure in the water supply system exceeds 0, MPa or is not stable and periodically
7
exceeds 0, MPa, it is necessary to install a suitable reducing valve (not included in the EWH 7
supply package) at the inlet of cold water in the EWH, in front of the relief valve (in the
16 17
direction of water flow) in order to reduce the pressure of cold water until it becomes normal.
It shall be forbidden to install a pressure control valve between the EWH and the relief valve;
џ
connect the EWH to the water supply line without a relief valve;
џ
drain water from the EWH when the power is on;
џ
use spare parts not recommended by the manufacturer;
џ
use water from the EWH for cooking;
џ
use water containing mechanical impurities (sand, small stones) that can lead to the
malfunction of the EWH and relief valve;
џ
switch on and use the EWH with closed input and output valves (branch pipes).
џ
change the design and mounting dimensions of EWH brackets;
4. Freezing of water in the device is unacceptable, as this leads to its failure, which is not a warranty
case.
5. The EWH is not intended for use by persons with reduced physical, tactile, or mental capabilities, or
by persons who cannot use the EWH, except when it is monitored or in accordance with instructions
from persons responsible for EWH safety. Children can use the EWH only under the supervision of
persons who know how to safely operate it. One shall always bear in mind that there is a risk of
scalding with water and electric shock.
6. If the buyer does not comply with Clauses 1 – 4 of this section, the manufacturer's warranty shall be
canceled.
7. The violation of the fire prevention rules in the Russian Federation approved by Government
Decree No. 1479 of 16.09.2020 , may lead to harm to life and health of a person, as well as property.
8. It shall be forbidden to leave the EWH switched on in the power supply network in the absence of
supervision for more than 1 day.
Description and principle of operation
The water heater is intended for indirect water heating by gas, liquid fuel or solid fuel boiler.
Electric heating element finishes water heating at low coolant temperature and allows using device in
off-line mode in summer.
EWH (electric water heater) outer casing is made of painted steel. The internal reservoir is made of
high quality stainless steel, which provides high corrosion resistance and, therefore, long-term
operation. The space between the outer case and internal reservoir is filled with foamed polyurethane
– modern, environmentally friendly thermal insulation with the best heat-saving features.
EWH is equipped with a control panel that allows adjusting water temperature and heating rate.
Water is heated in the reservoir using a tubular electric heater (TEH) mounted on a threaded flange.
TEH is controlled by a thermostat, providing smooth temperature adjustment up to + 74 °C (± 5 °C).
The thermostat automatically maintains water temperature at the level set by the user, periodically
switching EWH mode from heating (EWH switching on) to thermal insulation (EWH switching off) and
back.
EN EN