Thermasis HYDRA PLUS, Инструкция по установке и эксплуатации, Страница: 3 / 44

1
INTRODUCTION
HYDRA PLUS is a welded steel hydro-pellet stove with all hydraulic and safety accessories
packed inside the cabinet. Main features and advantages of HYDRA PLUS are as follows:
Automatic ignition
PID control, output regulation
High heat resistant ceramic sightglass with auto cleaning system
Double layer door design with additional tempered glass frontial door
Packed with all accessories suc as;
- Circulation pump with frequency modulation
- 7 lt expansion tank
- Safety valve
- Automatic air relief valve
- Water pressure switch for low pressure protection
- Air pressure switch
Safety against back burning
Exhaust fan speed modulation
Burning pot made of special stainless steel
Manually activated cleaning system in smoke pipes
Auto switch-off when there is no fuel
HYDRA PLUS is delivered in one single wooden package with all external cabinets assembed,
no additional assembly is requried
2
WARRANTY CONDITIONS
THE MANUFACTURER guarantees the product, with the exception of elements subject to
normal wear (listed below), for a period of 2 (two) years;

Starting from date of start-up, which is proven by a commissioning document that
contains the name of the seller and the date when the sale / first start-up took place

If there is no service/commissioning report, standard guarantee period starts with
the date when the sale took place.
The term ‘warranty’ refers to the (free-of-charge) replacement or repairs of parts
acknowledged to be faulty due to manufacturing defects.
Furthermore, in order for the guarantee to be valid, the product must be installed and
calibrated by qualified personnel. Installations that do not meet the current standards,
improper use and lack of maintenance as expected by the manufacturer, void the product
warranty. The warranty is valid on the condition that the instructions and warnings
contained in this manual are observed, and therefore the product is used correctly.
The replacement of the entire system or the repair of one of its components does not
extend the warranty period, and the original expiry date remains unchanged.