Thermasis HYDRA PLUS Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 44

Thermasis HYDRA PLUS Скачать руководство пользователя страница 29

STOP2 Day. These slots can be defined according to the timings set out, where the OFF
setting tells the clock to ignore the command. To modify, use P1 (to go up) and P2 (to go
down). Confirm with P3. To go to next chrono set press P5 or P6.

Submenu M2-3
The  “M-2-3  Program  Week“  menu  allows  you  to  enable  or  disable  and  set  the  weekly
programmable  thermostat.  The  weekly  function  has  4  independent  programs.  Additionally,
pressing  OFF  on  the  timetable  will  tell  the  system  clock  to  ignore  the  corresponding
command.

Submenu M2-4
Allows you to enable/disable and set the programmable thermostat functions on the weekend
(days 6 and 7, or Saturday and Sunday). To enable, press P3 on the “chrono week-end” item
and select “on” by pressing P1 (to go up) or P2 (to go down) and on the display segment
light. Selecting the times under Start 1 weekend and Stop 1 weekend will set the times that
the heater will function on Saturday, while Start 2 weekend and Stop 2 weekend will set the
operating times for Sunday.

Menu 03 – Language Selection
Allows you to set the language from those available. To move to the next language, press P1
(to go up) and to go back press P2 (to go down). To confirm and go back press P4.

«
...
27
28
29
30
31
...
»

Содержание HYDRA PLUS













































Отзывы:

Нет отзывов