Thermann TH28ENR6L, Руководство по установке

Страница: 47 / 52

47
Installation
1. Attach the mounting bracket to the wall.
The parts to be used vary depending on the
attachment method.
* Never use electric drivers, impact drivers
and so forth.
Tightening with excessive force may
result in deformation of the mounting
bracket and/or failures.
<When attaching to a junction box>
• Use the raised countersunk head screws to
attach the mounting bracket to the junction box.
(In this case, the wall anchor and raised
countersunk head wood screws are not used.)
Top
Bottom
Junction box
Mounting bracket
(accessory part)
Raised countersunk
head screw
(accessory part)
<When attaching to a wood surface>
• Use the raised countersunk head wood screws
to attach the mounting bracket.
(In this case, the wall anchor and raised
countersunk head screws are not used.)
Top
Bottom
Top
Bottom
<When attaching to a concrete wall surface>
• Drill a ø6mm hole, approx. 25mm - 30mm in
depth, and hammer in the wall anchor.
Attach the mounting bracket using the raised
countersunk head wood screws.
(In this case, raised countersunk head screws are not used.)
Mounting bracket
(accessory part)
Mounting bracket
(accessory part)
Wall anchor (accessory part)
Raised countersunk
head wood screw
(accessory part)
Raised countersunk
head wood screw
(accessory part)
Confirm the orientation of
the mounting bracket.
Confirm the orientation of
the mounting bracket.
Confirm the orientation of the
mounting bracket is correct.
2. Remove the decorative frame from the remote
controller. (The remote controller is inserted in
the decorative frame.)
Remove the remote
controller while pulling
the decorative frame
forward.
Decorative frame
Main remote
controller body