Thermaltronics AF-KIT, Руководство пользователя

Страница: 9 / 16

6
www.thermaltronics.com support email: support@thermaltronics.com
UNPACKING/ASSEMBLY/OPERATION
Assembly (Continued)
7. Attach the (5) Guide Pipe Assembly onto the soldering hand piece using the (4c) Guide Clip. (See:
Guide Pipe Assembly)
●
AF-KIT-1, AF-KIT-2 - The (4c) Guide Clip can be screwed onto the soldering hand piece by
hand.
●
AF-KIT-3 - Attach the (4c) Guide Clip to the soldering hand piece. Use a flat-blade screw driver
to secure the (4C) Guide Clip to the soldering hand piece.
●
AF-KIT-1M, AF-KIT-2T, AF-KIT-3K, AF-KIT-3KM, AF-KIT-3P, AF-KIT-3PM, AF-KIT-3SM -
No assembly of Guide Pipe is required, the Guide Pipe Assembly is already attached to the
soldering hand piece by default.
(1) Remove the hand piece top by rotating in
counter clockwise motion.
(2) Install the Guide Pipe Assembly to the
hand piece.
(1) Push the Guide Clip onto the hand piece (2) Use a flat-blade screw driver to tighten
the three screws on the Guide Clip.
Hand Piece Top
Hand Piece
Guide Clip
Guide Pipe Assembly
Guide Clip
Fasten Screws
No Assembly Required