Thermaltronics AF-KIT, Руководство пользователя

Страница: 12 / 16

9
AF-KIT User Manual
USER MANUAL
UNPACKING/ASSEMBLY/OPERATION
Operation - Adjusting the Speed, Length and Return
Speed Buttons - Increase or decrease the speed at which solder wire is fed.
● The value can be set between
0
and
9
for a total of 10 units. (Each unit is 4.6mm/sec)
(1) Minimum Speed
0
= slowest (4.6mm/sec)
(2) Maximum Speed
9
= fastest (46mm/sec)
Length Buttons - Increase or decrease the forward solder wire length.
● The value can be set between
00
and
99
for a total of 100 units. (Each unit is 0.14mm)
(1) Minimum Length
00
= shortest (0.14mm)
(2) Maximum Length
99
= longest (14mm)
Return Buttons - Increase or decrease the return solder wire length.
● The value can be set between
00
and
99
for a total of 100 units. (Each unit is 0.14mm)
(1) Switched Off
00
= no return (0.00mm)
(2) Minimum Length
00
= shortest (0.14mm)
(3) Maximum Length
99
= longest (13.86mm)
Note: To prevent solder wire from clogging inside the (5) Guide Pipe Assembly and (3) Wire Adjustment
Assembly, never set the Return length to be higher than the Forward Length.
(1f) Return Indicator LED
(1i) Speed Buttons (1h) Length Buttons
(1g) Return Buttons
(1d) Speed Indicator LED (1e) Length Indicator LED