Soldering Station
Instruction Manual
Thank you for purchasing the HAKKO FX-100 Soldering Station.
Please read this manual before operating the HAKKO FX-100.
Keep this manual readily accessible for reference.
1. PACKING LIST AND PART NAMES
Please check to make sure that all items listed
below are included in the package.
2. SPECIFICATIONS
Output power
Output frequency
Dimensions
Weight
50 W
13.56 MHz
127 (W) × 150 (H) × 167 (D) mm
(5.0 × 5.9 × 6.6 in.)
3 kg (6.6 lb.)
Station
HAKKO FX-1001 soldering iron
Cord
Total Length (w/o cord)
Weight (w/o cord)
1.3 m (4.3 ft.)
190 mm (7.5 in.) with T31-02D24 tip
31 g (0.07 lb.) with T31-02D24 tip
NOTE:
This product is protected against electrostatic discharge.
CAUTION
This product includes such features as electrically conductive plastic parts and grounding of the handpiece
and station as measures to protect the device to be soldered from the effects of static electricity. Be sure to
observe the following instructions:
1. The handle and other plastic parts are not insulators, they are conductors. When replacing parts or
repairing, take sufficient care not to expose live electrical parts or damage insulation materials.
2. Be sure to ground the unit during use.
* Specifications and design are subject to change without notice.
This device complies with Part 18 of the FCC Rules.
85 W
T31-01 Series / 450℃ (840℉)
T31-02 Series / 400℃ (750℉)
±1.1℃ (±2.0℉)
Power consumption
Tip series /
Tip temperature
Temperature stability
HAKKO FX-100 soldering station
1
HAKKO FX-1001 soldering iron
1
Sleeve (Green)
1
Sleeve (Gray)
1
Cleaning wire
1
Heat resistant pad
1
Iron holder
1
Power cord
1
Instruction manual
1
HAKKO FX-100
Soldering station
HAKKO FX-1001
Soldering iron
Power cord
Heat resistant
pad
Iron holder
Iron holder
base
Cleaning
sponge
Sleeve
(Green)
Sleeve
(Gray)
Power switch
Receptacle
Cleaning wire