Thermal AXAI-06M, Руководство по установке

Страница: 6 / 21

5
Tools needed to install these products
1. Hammer Drill
2. Sprit Level
3. Pipe Bending equipment for refrigeration pipe
4. Pipe bending equipment for water pipe
5. Brazing torch
6. Flairing tool
7. Tape measure
8. Torque spanners
9. Pipe cutters
10. Socket set with metric sockets
11. Phillips 2 screwdriver
12. Electrical terminal screwdriver
13. Electrical crimping tool
14. Electrical Side cutters
15. Trimming knife
16. Wire strippers
17. Hack saw
18. Masonry drill bits for fixings 7mm and 10mm are recommended
19. Masonry core bit for interconnecting services 75mm recommended
20. Vacuum pump
21. R410a Gauges
22. Torr gauge
23. Hex keys 4mm
24. Adjustable spanner
25. OFN & Regulator
26. PPE ie gloves, glasses and steal toe protectors
SAFETY INSTRUCTIONS
To prevent injury to the user, other people, or property damage, the following instructions
must be followed. Incorrect operation due to ignoring these instructions may cause harm or
damage.
Install the unit only when it complies with local regulations, by-laws and standards. Check
the main voltage and frequency. This unit is only suitable for earthed sockets. An isolation
switch is required for both indoor and outdoor units.
The following safety precautions should always be taken into account:
-
Be sure to read the following WARNING before installing the unit.
- Be sure to observe the cautions specified here as they include important items related to
safety.
-
After reading these instructions, be sure to keep it together with the manual in a handy
place for future reference.