18
Modbus RTU Settings: Baud-57600, Data Length-8,
Parity-Odd, Stop Bits-1.
Figure 43 - User Setup – Modbus RTU Setup
User Setup – Temperature Retransmit
Figure 44 - User Setup – Temperature Retransmit
Setup
User Setup – IP Address
Figure 45 - User Setup – IP Address Setup
User Setup – Units
Figure 46 - User Setup – Display Units Setup
User Setup – Remote Setpoint
When the remote setpoint option is active, an
incoming 4-20mA or 0-10VDC signal controls the
setpoint of the master chiller. The signal will span
from the MINIMUM TEMPERATURE to the
MAXIMUM TEMPERATURE as defined in
Figure 47
.
Figure 47 -User Setup – Remote Setpoint Setup
User Setup – Primary / Secondary
Figure 48 - User Setup – Primary / Secondary Setup
