Thermador SAPPHIRE DWHD650GFP, Инструкция по использованию и уходу

Страница: 18 / 72

Cycle Completion Signal
The cycle completion is indicated by a tone. This function can be changed as follows:
•
Open the door.
• Turn unit on by pressing
[ON/OFF]
.
• Hold down [NORMAL] and press and hold [START] until the display shows “ H:00 ”.
• Release both buttons.
• Press [NORMAL] until the display shows “ b:02 ”.
• Press [QUICK CLEAN] to increase or decrease the tone “ b:00 ” = of and “ b:03 ” = loudest.
• Press
[START]
to save the setting.
• Close the door.
Intensive Drying
The inal rinse uses a higher temperature which improves the drying result.
The running time may increase slightly. (Use caution if utensils are delicate!)
•
Open the door.
• Turn unit on by pressing [ON/OFF] .
• Hold down [NORMAL] and press and hold [START] until the display shows “ H:00 ”.
• Release both buttons.
• Press
[NORMAL]
until the display indicates “
d:00
”.
• Press [QUICK CLEAN] to turn on intensive drying “ d:01 ”= on and “ d:00 ”= of.
• Press [START] to save the setting.
• Close the door.
Auto Power Of
To save energy, the dishwasher is turned of 1 minute after the wash cycle ends. Auto Power Of can be adjusted from
P:00 to P:02.
To change the factory setting (P:01):
•
Open the door.
• Turn unit on by pressing [ON/OFF] .
• Hold down [NORMAL] and press and hold [START] until the display shows “ H:00 ”.
• Release both buttons.
• Press [NORMAL] until the display indicates “P:01”
.
• Press
[QUICK CLEAN]
to change auto power of setting.
“P:00”
= dishwasher does not turn of automatically,
“P:01” = dishwasher turns of after 1 minute, “P:02” = dishwasher turns of after 120 minutes (2 hours)
• Press
[
START
]
to save the setting.
• Close the door.
To change the language:
• Open the door.
• Turn unit on by pressing
[ON/OFF]
.
• Hold down [NORMAL] and press and hold [START] until the display shows “ H:00 ”.
• Release both buttons.
• Press [NORMAL] until the display indicates “L:01”
.
• Press [QUICK CLEAN] to change auto power of setting.
“L:02”
= English
“L:03”
= French
“L:07”
= Spanish
• Press [
START
] to save the setting.
• Close the door.
17