Installation Instructions
English | 16 |
2. Slide the upper duct cover assembly at the top of the
structure. Secure the duct cover assembly to the upper
horizontal support with two mounting screws.
Mounting the hood assembly
1. Using 2 or more people, lift the range hood assembly
under the blower housing, and align the installation
holes. Hold the hood assembly using 2 leveling screws.
(See the image).
2. Secure the hood assembly to the structure with 8
installation screws. Remove the 2 leveling screws from
the structure.
3. Untie the drawer connector and extend it to the upper
side of the blower housing.
4. Install the two cable holders into the blower housing.
5. Pass the cable connector under the holders and secure
them.
6. Plug the wire connector assembly supplied with the
blower housing to the mating cable connector from the
hood assembly.
A.
A
B
C
Hood assembly connector
B. Plastic cable holders
C. Cable holder screws
Mounting the lower duct covers
1. Place the lower duct covers over the hood assembly.
2. Assembly the two pieces over the upper duct cover
assembly.
•
Slide the edge of the duct cover under the clip
located in the opposite duct cover.
•
Push them until you hear a click. The bulges on the
edge of the duct covers has to enter in the clip
slots.
3. Slide the lower duct cover assembly down to the base of
the hood.
