ENGLISH
Thermador Dishwasher Model DW 44Z
www.thermador.com
Electrical Supply Connection
•
Install strain relief or conduit connector into
opening on J-box.
•
Strip the insulated wires, being extremely careful
not to strip too much insulation.
•
Insert and securely fasten into strain relief, two-
conductor supply cable with ground.
•
Twist wire connectors
tightly
onto the wires,
ensuring that no bare wiring is exposed (from
insulated wires).
•
Press wires back into J-box
•
Securely fasten toe panel with screw(s)
provided from accessories package.
Be sure to follow all local and national
electrical codes and ordinances.
Connecting Electrical Supply
This appliance must be connected to a grounded metal
permanent wiring system; or an equipment grounding
conductor must be run with the circuit conductors
and connected to the equipment grounding terminal
or lead on the dishwasher. The dishwasher must be
properly grounded before operating. Make sure that
the dishwasher is connected to a suitable ground in
compliance with the N ATIO N AL ELECTRICAL CO D E,
in the United States, or the CAN AD IAN ELECTRIC
CO D E C22.1-latest edition, in Canada as well as any
provincial/state or municipal or local codes that apply.
Grounding Instructions
Figure 18 – Incorrect Connection in
Junction Box
THESE IN STALLATION
IN STRUCTION S ARE
IN TEN DED FOR USE BY
QUALIFIED IN STALLERS
•
D ISCO N N ECT ELECTRICAL POW ER AT
THE CIRCUIT BREAKER BOX O R
FUSE BOX BEFO RE IN STALLIN G THE
D ISHW ASHER.
•
ELEC T RIC ALLY G RO U N D D ISH -
W ASHER.
•
U SE C O PPER C O N D U C TO RS O N LY.
FAILU RE TO FO LLO W T H ESE
IN STRUCTIO N S CO ULD RESULT IN
SERIO US IN JURY O R D EATH.
ELECTRICAL SHOCK HAZARD
Figure 17 – Correct Connection in
Junction Box
WARNING
Page 11
Black to
Black
W hite to
W hite
U.L. listed
Conduit
Connector
or Strain
Relief
Green or
Bare
to Green
or Bare
