ENGLISH
Thermador Dishwasher Model DW 44Z
www.thermador.com
Drain Hose Connection
Drain Hose
•
Before beginning, turn off the water supply!
•
The access hole for the drain hose should be 1.25”
(32 mm) diameter.
•
Use the hose clamps and rubber connection hose
(Figure 3) to connect the drain hose to the sink,
disposer or air gap (Figure 14).
Figure 14
G, Fig 3
Drain Hose
Connected to
Sink
Be sure to follow your national
and local codes at all times.
Drain Hose
in Sink with
Air Gap &
Disposer
Figure 13
m
in
. 2
0”
(
50
0
m
m
)
cl
ea
ra
nc
e
to
f
lo
o
r
Air Gap
Rubber
Connector
Trap
disposer
Figure 12
Drain Hose
in Sink with
Air Gap/ N o
Disposer
Air Gap
Rubber
Connector
Trap
m
in
. 2
0”
(
50
0
m
m
)
cl
ea
ra
nc
e
to
f
lo
o
r
THESE IN STALLATION
IN STRUCTION S ARE
IN TEN DED FOR USE BY
QUALIFIED IN STALLERS
Failur e t o provide t he proper dr ain
connection height, 20” (508mm) above
floor level with high loop or air gap, will
result in im proper dr aining of t he
dishwasher. Improper draining may cause
damage to the dishwasher.
CAUTION
Openings for drain lines must be installed
in the marked areas as shown in Figures 8
and 9 t o avoid int er ference wit h t he
dishwasher frame or other components.
Page 9
