Thermador cit36xkbb, Руководство по установке

Страница: 10 / 28

10
The appliance must be secured from below using the
hold down brackets provided so it does not slip.
1.
Rotate the appliance and fit it so that the screws
provided are seated loosely in the holes. Move the
hold down brackets so that the appliance can be
placed in the cutout.
2.
Place the appliance carefully into the cutout.
3.
Insert the clamping screws into the hold down
brackets and fix the appliance to the countertop.
Tighten screws.
Note:
Protect delicate countertops by placing a
wooden disc underneath.
Connect Electrical Supply
9
CAUTION
Before installing, turn off at the service panel. Lock
service panel to prevent power from being turned
on accidentally.
9
CAUTION
To reduce the risk of electric shock and fire, do not
use a flexible power supply cord.
Refer to data plate for more information. See "Service" for
data plate location.
The branch-circuit breakers ampacity, the wire sizes and
the connections must be conform to the requirements of
the National Electrical Code or Canadian Electrical Code
and all local codes and ordinances.
Attach flexible conduit to the junction box. Connect the
lead wires to the junction box supply wires in proper
phase:
▯
black (L1) to black
▯
red (L2) to red
▯
green or bare to ground
If the cooktop is installed and connected as specified
above, it will be completely grounded in compliance with
the National Electrical Code.
Check the Installation
9
WARNING
Before you plug in an electrical cord or turn on
power supply, make sure all controls are in the OFF
position.
Remove everything from the cooktop surface. Clean
cooktop surface with cooktop cleaning creme.
Switch on the circuit breaker.
Verify that elements function properly.
Removing appliance
Disconnect the appliance from the power supply.
Remove hold down brackets. Push out the appliance
from below.
9
CAUTION
Damage to appliance! Do not lift device out from
above.
1 House power supply cord
2 Black wire
3 Junction box
4 Cooktop power supply cord
5 Grounded green or bare cable
6 Certified UL connector
7 Red wire