background image

 

accessories, repair and service the heater. The term “qualified agency” means any individual, firm, 
corporation, or company that either in person or through a representative is engaged in and is 
responsible for: 
 
a.) Installing, testing, or replacing gas piping or 
 
b.) Connecting, installing, testing, repairing, or servicing equipment; that is experienced in such work; that 
is familiar with all precautions required; and that has complied with all the requirement of the authority 
having jurisdiction. 
 

2 PRODUCT FEATURES

 

 

SAFETY PILOT 

This heater has a pilot with an Oxygen Depletion Sensing (ODS) safety shutoff system. The ODS/pilot 
shuts off the heater if there is not enough fresh air. 

 

PIEZO IGNITION SYSTEM 

This heater is equipped with a piezo igniting system. No power supply required. 
 

GAS OPTIONS CAPABLE (Dual Fuel Models Only) (Models that start with WDFT) 

If you have the dual fuel model, your heater is equipped to operate on either Propane or Natural gas. The 
heater is shipped from the factory ready for connecting to Propane. The heater can easily be changed to 
Natural gas by having your qualified installer follow the instructions and the markings on the heater. 
 

THERMOSTATIC CONTROL 

These heaters have a control valve with a thermostat sensing bulb. This results in the greatest heater 
comfort and may result in lower gas bills. 
 

LOCAL CODES 

Install and use heater with care. Follow all local codes. In the absence of local codes, use the latest 
edition of The National Fuel Gas Code, ANSI Z223.1/ NFPA 54. 
 

3. Preparing for installation 

Before beginning assembly or operation of the product, make sure all parts are present. Compare parts 
with package contents list and diagram above. If any part is missing or damaged, do not attempt to 
assemble, install or operate the product. Contact customer service for replacement parts.   
 

Before installing heater, make sure you have the items listed below: 

 
 

 
 
 
 
 

 

 
 

 

Figure 1 - Vent-Free Gas Heater

 

Igniter button 

control valve knob 

grill 

  NAT and LP 
Gas conversion 
(WDFT only) 

Содержание WDFT060



































Отзывы: