therevox ET-4.2, Руководство пользователя

Страница: 7 / 11

7
phones volume
return/ext level
filter resonance
return/ext send phones
effects loop and phones
The send and return/ext jacks can be used as an effects
loop to insert external effects before the internal filter and
reverb.
The return/ext jack can also be used to insert an external
audio signal into the ET-4.2. Adjust the level using the
return/ext level knob. A red light will indicate if the signal
level is too high and creating distortion.
Stereo headphones can be plugged into the phones jack,
and the volume controlled by the phones volume knob.
filter and reverb
filter cutoff
dry+reverb mix
output volume
6
The filter cutoff alters the timbre of the oscillators.
Turning the knob clockwise on this low-pass filter
allows increasingly higher frequencies to be heard.
This can also be controlled with an expression
pedal or external control voltage plugged into the
exp jack.
The filter resonance controls the amount of
emphasis at the filter cutoff frequency.
Reverberation is generated by sending the sound
through a series of springs inside the ET-4.2. The
dry+reverb mix knob controls the blend between
the original and reverberated sound.
The amplitude of the output signal is controlled by
the output volume knob.