therevox ET-4.2, Руководство пользователя

Страница: 9 / 11

11
care
This instrument is handcrafted out of North American black walnut
and is protected with a hand rubbed tung oil finish.
Panels and wood can be cleaned with a slightly damp rag.
Because of the internal spring reverb, take care when handling and
moving.
Avoid water and extreme temperatures. In case of emergency, do not
use instrument as a flotation device.
Your instrument has been calibrated and tested by Therevox. Please
contact us if you have any questions or comments.
10
A 1/4" mono cord can be used on
the side panel to create custom
patches.
ring -> exp : filter cutoff frequency
will change with ring position.
[1] -> exp : control the filter cutoff
frequency with intensity key 1.
[2] -> exp : control the filter cutoff
with intensity key 2. Optionally
mute oscillator 2 by turning sync on
and setting this oscillator to the
lowest octave.
Tune Out -> exp : use osc 2 as an
LFO by setting it to "Low" and
disabling ring > osc 2.
The filter cutoff knob changes the
range when using the exp input.
exp
ring