Themis RES-32XEL, Руководство по установке

Страница: 18 / 52

RES-32XEL Installation Guide
1-8
Themis Computer
1.1.2.1 Microsoft OnNow
With OnNow, a comprehansive approach to system and device power control, a PC
is always ON but appears to be OFF and responds immediately to user requests.
1.1.2.2 Suspend-State Indicator
When the CPU enters a suspend state, the
Power
LED will start blinking to indicate
that the CPU is in suspend mode. Pressing any key on the keyboard will awaken the
CPU, at which time the power LED will stop blinking and remain on.
1.1.2.3 Wake-Up Alarm
Through the system BIOS settings, the user can configure a timer to awaken the sys-
tem at a predetermined time.
1.1.2.4 Main Switch Override
ATX 2.01-compliant power supply only. If enabled in the system setup, the RES-
32XEL power button on the front of the unit functions as a system suspend button to
enter a SoftOff state. The monitor will be suspended, and the hard drive will spin
down. Depressing the power button again will cause the system to awaken.
During the
SoftOff
state, the ATX power supply provides only enough power to
keep the minimum required circuitry alive. If you want to turn the power off com-
pletely, in the case of a system malfunction, for example, depress and hold the power
button for four (4) seconds. The system will turn off completely with no power to the
motherboard provided.
1.1.2.5 External Modem Ring-On
ATX 2.01-compliant power supply only. When the system is in the SoftOff state, it
can be awakened by the ringing of an external modem. This feature can only be pro-
vided if “External Modem Ring-On” is included in the installed modem card and the
corresponding setting is enabled in the system BIOS settings.
1.1.2.6 Wake-On-LAN
ATX 2.01-compliant power supply only. Wake-On-LAN (WOL) is the ability of a
remote management application to power up a computer that is powered off. To keep
daily LAN maintenance traffic to a minimum and avoid needless interruptions to
LAN users during work hours, remote PC setup, updates, and asset tracking can be
planned to occur during off-hours and weekends. To operate, WOL must be enabled
in the BIOS setup of the system.