2
•
EC Directives: Conforms to the latest directives
•
Dimensions: H= 82mm, W= 82mm, D= 55.6mm
4. System Requirements
•
Smartphone/Tablet with at least iOS 8.0 or Android 5.0
•
WLAN-enabled router: 2.4GHz (Separate Band)
•
Tuya Smart App
5. Installation
Doorbell
•
Remove the wall plate from the Wi-Fi doorbell by undoing the retaining
screw with the screwdriver provided. The wall plate can now be removed
from the body of the Wi-Fi doorbell.
•
Mark the position of the mounting holes on the wall using the wall plate
as a template. Drill out the mounting holes taking care to avoid any joists,
electrical cables or water/gas pipes that may be hidden beneath the
surface.
•
Once the holes have been drilled out insert the rawl plugs into the holes
and fix the wall plate to the wall using the correct mounting screws
provided.
•
Before placing the body of the Wi-Fi doorbell on the wall plate, insert the
18650 batteries into the battery compartment of the doorbell. The unit
should switch on and be ready for pairing.
•
It is recommended that the pairing process is complete before fully affixing
the product to the wall as the unit may need resetting during this process.
If you wish to register on the Tuya Smart App and pair the device before
mounting the product to the wall, skip to the next section of the manual.
It is also worth noting that the installation location should be in a suitable
area where a 50% or more Wi-Fi signal can be established.
•
Once pairing is complete mount the body of the Wi-Fi doorbell to the wall
plate and tighten the retaining screw so the body and wall plate are held
firmly together.
