7
Light does not switch
off and/or light
switches on spontane-
ously when no one is
present
Wait for switch-off delay (self-learning);
Thermal sources of interference in the detection
area: fan heaters, incandescent lamps/halogen
spotlights, moving objects (e.g. curtains hanging in
an open windows);
Load (EBs, relays) not cleared
Push button does not
function
Device still in the start-up phase; illuminated push
button was used without neutral conductor;
Push button not led to the master
Light cannot be swit-
ched off with the push
button
Push button not fed to the detector. Check wiring
to the push button.
Device does not
respond
Short circuit or several phases in parallel swit-
ching! Disconnect detector from the power supply
for 5 mins. (thermal fuse)
Error flashing
(4 x per second)
Error in self-test;
Device not properly functional!
LED display
LED
Description
Blinking in 1 second cycle The presence detector is in the start-up phase.
Flickering for 2 s
The command sent from the remote control
via infrared was accepted by the presence
detector.
Lights up briefly
The command sent from the remote control via
infrared was rejected by the presence detector.
The command is not valid. Check the detector
type or parameter selected in the SendoPro.
Fast blinking
Error blinking; The presence detector has
found an error.
Flickering for 20 s
Teach-in via potentiometer is activated.
Lights or flickers
irregularly
The presence detector is in presence test
mode or "LED display movement" is activated.
The LED displays detection of movement.
Guarantee
Theben HTS presence detectors are manufactured with the
utmost care and using state-of-the-art technology and are
quality-tested. Theben HTS AG therefore guarantees perfect
operation when used correctly. Should a fault occur, however,
Theben HTS AG will fulfil the guarantee within the scope of
the general terms and conditions.
Please note in particular:
•
that the guarantee period lasts 24 months from the date
of manufacture.
•
that the guarantee is invalidated if you, or a third party,
make changes or undertake repairs to the devices.
•
that, insofar as the presence detectors are connected
to a software-controlled system, the guarantee for this
connection is only valid when the indicated interface
specification is complied with.
We undertake to repair or place as quickly as possible all
components of the delivered device that have become
defective or unusable through demonstrably poor material,
faulty construction or incomplete delivery up to the end of the
guarantee period.
Returns
In the event of a guarantee claim, please return the device to
the relevant dealer together with the delivery note and a brief
description of the fault.
Industrial property rights
The design as well as hardware and software of these devices
are protected by copyright.
Dimensional drawings
11. Accessories
Back box 110A WH
Item No.: 9070912
Details > www.theben.de
Back box 110A GR
Item No.: 9070913
Details > www.theben.de
DE (ceiling installation) box 73A
Item No.: 9070917
Details > www.theben.de
Covering clip for area restriction
Item No.: 9070921
Details > www.theben.de
