Each channel can be switched manually ON or OFF as a continuous connection.
A continuous connection has maximum priority. The channel remains in the
continuous connection position ON or OFF until it is manually reset.
For continuous connection with time limitation ON / OFF see section 9.3.
Example:
Switch channel 2 on continuous connection to OFF.
Fig. 1:
in auto mode select channel
Fig. 2:
select continuous connection for the channel
Fig. 3:
0 = continuous OFF (continuous ON = 1)
70
7.0 Manual intervention into the program
7.1 Continuous connection ON or OFF
7.2 Terminating continuous connection
A continuous connection must be manually terminated. After termination of the
continuous connection the automatic program determines the switching status of
the channels.
Example:
Terminate continuous
OFF
on channel 2.
7.3 Manual ON (switching preselection)
Each channel can be switched on manually in the automatic program.
The symbol
H
= Hand than appears on the display.
A switch preselection is cancelled again by the next switch command.
The display
H
goes out.
Select channel:
e. g. key
1
= channel C1, key
2
= channel C2.
Select status:
key
1
= switch on, key
0
= switch off.
Example:
channel
C2
to switch on manually, press keys
2, 1
.
Channel 2
On
Auto
Auto
Channel
Continuous connection
Off
Channel
Terminate continuous
connection
Содержание SEL 173 DCF
Страница 30: ...128 Notizen Note Notice Nota ...
