3. The check is completed. The display automatically switches back
to the original state.
4.7
Temporarily Changing the Target
Temperature
With this function, you can temporarily change the target temperature
given by the program. The changed target temperature is not saved
long-term. It only remains set until the next temperature change of the
program (e.g. from comfort to lower temperature).
Note:
If one of the programs "Perm. comfort", "Perm. lower" or "Frost"
is set, the temperature change remains until the program changes.
4.8
Early Cancellation, Check or Clearance of
the Holiday Program
If you want to cancel an activated holiday program early, you must
clear the holiday program.
Note:
The setting of the holiday program is described in section 5.1
on page 21.
-
Set display type, (i.e. which information is shown in the dis-
play, also see page 25).
1. Press one of the buttons
or
. The display shows the set tar-
get temperature.
2. Change the target temperature with the buttons
or
.
3. After approx. 3 seconds, the display automatically switches back
to its original state, and the room thermostat regulates to the
changed target temperature.
1. Open the hinged cover and turn the rotary switch to the MENU
setting.
2. With the buttons
or
, select the option
Holiday
. Confirm with
the
OK
button.
3. With the buttons
or
, select the desired option and confirm
with the
OK
button:
-
Check
: By repeated pressing of the
OK
button, you can check
all settings of the saved holiday program one after the other
(start or end time, temperature).
-
Clear
: By pressing the
OK
button, the saved holiday program
is cleared.
You can now program a new holiday program (see section 5.1
on page 21) or set the desired temperature profile (automatic
program) at the rotary switch (see section 4.5 on page 19).
3. The check is completed. The display automatically switches back
to the original state.
4.7
Quick-heating function (boost function)
This function allows you to rapidly heat the underfloor heating to the
comfort temperature (corresponds to Comfort 1)
plus 2 °C
. Once the
temperature has been reached, the Comfort mode will operate for 1
hour.
To do so, press the Info key for approx. 5 s.
boost
appears.
4.8
Temporarily Changing the Target
Temperature
With this function, you can temporarily change the target temperature
given by the program. The changed target temperature is not saved
long-term. It only remains set until the next temperature change of
the program (e.g. from comfort to lower temperature).
Note:
If one of the programs “Perm. comfort”, “Perm. lower” or
“Frost” is set, the temperature change remains until the program
changes.
1. Press one of the buttons
▲
or
▼
. The display shows the set
target temperature.
2. Change the target temperature with the buttons
▲
or
▼
.
3. After approx. 3 seconds, the display automatically switches back
to its original state, and the room thermostat regulates to the
changed target temperature.
4.9
Early Cancellation, Check or Clearance of
the Holiday Program
If you want to cancel an activated holiday program early, you must
clear the holiday program.
Note:
The setting of the holiday program is described in section 5.1.
1. Open the hinged cover and turn the rotary switch to the MENU
setting.
2. With the buttons
▲
or
▼
, select the option
holiday.
Confirm with
the
OK
button.
3. With the buttons
▲
or
▼
, select the desired option and confirm
with the
OK
button:
-
check:
By repeated pressing of the
OK
button, you can check
all settings of the saved holiday program one after the other
(start or end time, temperature).
-
clear:
By pressing the
OK
button, the saved holiday program
is cleared.
You can now program a new holiday program (see section 5.1) or
set the desired temperature profile (automatic program) at the
rotary switch (see section 4.4).
21
ENGLISH
