REC 1/REC 2
REC 1 (1 channel)
REC 2 (2 channel)
REC 1
(1 Channel)
Connection is made at terminals 1, 2, 3.
REC 2
(2 Channel)
Connection of channel 1 is made at terminals 1, 2, 3.
Connection of channel 2 is made at terminals 4, 5, 6.
3.2.2
Connection examples REC 2/REC 2
4
Installation and Operation
For installation of
RAMSES® 813 top
, follow the sections
4.1 to 4.5.
4.1 REC 1/REC 2
4.1.1
Alignment of the Antenna
Assumption:
The product REC 1/REC 2 is connected to mains voltage.
For optimum reception, the antenna must be in a vertical position. In a
few exceptional cases, interference signals can be received from the sur-
rounding area. Depending on the strength of the interference several
LEDS may be illuminated. Align the antenna in such a way that as few
LED’s as possible are illuminated.
Note:
Do not install the antenna near water or electrical circuits!
4.1.2
Optimising the reception quality
The channel (s) C1/C2 at the receiver must be
OFF,
i.e. the corresponding
status display(s) (LED) must be
OFF
.
Selecting the receiver
Use the +/– button to select the receiver REC 1/REC 2, REC 11/12/21 or
REC 31 on the thermostat RAMSES 813 top and confirm with
OK
.
To connect
RAMSES® 813 top
to the power supply and set language,
time and date, follow the instructions in chapter 4.3 to 4.4.
24
ENGLISH
