IP Interface KNX
General
8
The power supply can be implemented via PoE (Power over Ethernet) according to IEEE 802.3af class 1 or via a
supply voltage. If both options are connected simultaneously, PoE will be used.
The Theben Tool, which is capable of detecting the Interface in the network (IP discovery), is available for the
IPsecure Interface (see chapter
Theben Tool
).
An ETS app (Theben Update App) is available for the firmware update. If KNX Secure mode is not activated for the
devices, a firmware update can also be performed with the Theben Tool.
During the update process, the KNX bus (TP) must be connected in addition to the IP network (LAN). Otherwise,
the update process will fail.
It must be ensured that no voltage failure (KNX or IP) occurs during the update process, otherwise the device can
be destroyed.
