IPsecure Interface KNX
Device technology
12
Design
Modular installation device (MDRC)
Modular installation device, Pro
M
Overall dimensions
90 x 36 x 64 mm (H x W x D)
Mounting width
2 x 18 mm modules
Mounting depth
68 mm
Installation
On 35 mm mounting rail
To DIN EN 60 715
Mounting position
Any
Weight
0.1 kg
Housing, color
Plastic, halogen free, gray
Approvals
KNX to EN 50 090-1, -2
CE marking
In accordance with the EMC directive and low
voltage directive
Device type
Application
Maximum number of
communication objects
Maximum number of
group addresses
Maximum number of
assignments
IPsecure Interface KNX
IPsecure Interface/…*
0
0
0
* … = Current version number of the application.
Please refer to the software information on our website for this purpose.
Note
ETS (ETS 5 version 5.7.4 or higher) and the current version of the device application are required for programming.
If the device is to be operated in KNX Secure mode, the commissioning key (FDSK; see chapter
) on the side of the unit will
be required as well.
The latest version of the application and corresponding software information are available for download from
import into ETS, the application is stored in the
Catalogs
window under
Manufacturers/Theben/System Infrastructure and
Interfacing/IP Routers and Interfaces
.
The device does not support the locking function of a KNX device in ETS. If you use a
BCU code
to disable access to all the project
devices, it has no effect on this device. Data can still be read and programmed.
Exception:
When KNX Secure mode is activated, the device can be programmed only using the existing project.
