Theatrelight CUEMASTER II, Руководство пользователя

Страница: 88 / 111

CUEMASTER II OPERATION 83
CUEMASTER SCREEN DISPLAY
While the Cuemaster can be operated satisfactorily without any other display assistance, you will find that busy shows are easier to
operate using the Screen display.
CONNECTING THE LCD DISPLAY
The Cuemaster II is fitted with a video display card suitable for use with any colour LCD monitor. A suitable size of screen is a 15 inch
display.
1 Plug the monitor video cable into the 15 pin D connector at the back of the Cuemaster II.
2 Connect power to the monitor, and adjust the screen size, contrast and brilliance for correct display.
Several pages of information provide data on output channel levels, master state, fade state, and output dimmer levels.
CHANGING SCREEN PAGES
You can move between the various screen pages at any time as follows:
1 Press [
5
], the Screen Up key to move up a page.
2 Press [
6
], the Screen Down key, to move down a page.
The following pages are available:
SCREEN PAGE 1: Normal default screen display, shows 72 Channel levels, Submasters, Fade Scene and Show
Cue status. This screen is described at more length overleaf.
SCREEN PAGE 2: Channel levels 1-288. This same page used in Channels Edit Page mode. In this mode the 72
channels of that page are highlighted for easy identification.
SCREEN PAGE 3: Dimmer levels 1-400. The page shows the live dimmer levels being transmitted down the DMX-
512 line in blocks of 100.
SCREEN PAGE 4: Dimmer levels 401-800.
SCREEN PAGE 5: Dimmer levels 801-1024.
SCREEN PAGE 6: Operator's dark screen, a special low brilliance page. Pushing the screen down button from the
normal screen page settings turns the screen black, and is more convenient than turning off
the monitor.
§
The Screen Page display cycles through all the display pages in either direction. You can also restore the screen to the normal
default page 1 from any other page by pressing the [CL] key.