Theatrelight CUEMASTER II, Руководство пользователя

Страница: 42 / 111

CUEMASTER II OPERATION 37
SCENE EDITING
You can edit the playback levels of any Manual or Fade-Scene using the Channel Edit Page Keys together with the Up and Down keys,
and then modify the original scene. Editing must be done with the scene live on stage. Record must be enabled for level editing.
EDITING PLAYBACK LEVELS
You can edit the levels of all 288 Channels of the Cuemaster II by using the four Channels Edit Page keys at the right of the patch
keyboard as previously described on page 19. In Channels Edit mode the Up, Down, and All keys fade selected playback levels at the
rate set by the Scene Fade timer, excepting if the time is set to Instant, when a four second default fade rate is imposed to prevent
obvious errors on stage. All edited levels over-ride normal playback.
1 Press the Channels Edit Page Key C1. The Patch display above shows 1-72 P1 indicating that Channels Edit Page 1
mode is on. The Mimic LEDs above the preset faders show live channels.
2 Hold [UP], and press any flash key: the level will fade up. The Channel and Level display above shows the edited channel
number and level, while the Dimmer display shows ChP1 to indicate you are in Channels Edit mode.
3 Hold [DOWN] and press any flash key: that level will fade down.
4 Hold [ALL], and press [UP] or [DOWN]: all live channels will fade up or down together. Whenever Up, Down or All are
pressed by themselves, the Mimic LEDs display all channels which have been edited NOT levels.
5 Press the other Channels Edit Page Keys to edit the rest of the 288 channel levels. To end Channels Edit mode, press
the same key again so the Channel display is blank. The LCD screen also reverts to the normal screen display.
COMPARING LEVELS
Editing any channel level using the Up, Down, and All keys sets the LED above the Compare key to Red. If you press the Compare key,
the edited levels are alternated with the original levels, allowing an instant comparison of changes.
1 After editing levels as above, press [COMPARE]: the lighting reverts to the original levels (Green LED).
2 Press [COMPARE] again: the edited levels are shown (Red LED).
CLEARING EDITED LEVELS
You can clear edited levels as follows:
> Hold [COMPARE], then press [UP]: the Compare LED flashes while the levels fade back to the original state.