Theatrelight CUEMASTER II, Руководство пользователя

Страница: 24 / 111

CUEMASTER II OPERATION 19
FLASHING ALL PRESET FADER CHANNELS
If you press the FLASH key (the key above the Channels Master) the Channels Master is set instantly to Full:
1 Set the Channels Master at zero.
2 Move some channel faders up.
3 Press [FLASH]. The channels flash instantly to the level of the channel faders.
SETTING UP ALL 288 CHANNEL LEVELS
Access to all 288 Channels of the Cuemaster II is provided by four Edit Channels Page keys (C1, C2, C3, and C4) at the right of the
patch keyboard, together with the Up and Down keys. The top Edit Channels Page key (C1) enables flashing or editing of channel levels
1-72 using the preset flash keys and the Up and Down keys. The other Edit Channels Page keys (C2-C4) access the rest of the 288
channels, each a page of 72 channels at a time as follows:
§
Edit Channels Page Key [C1] : Up/Dn edit of Channels 1-72 (Channels Edit Page 1)
§
Edit Channels Page Key [C2] : Up/Dn edit of Channels 73-144 (Channels Edit Page 2)
§
Edit Channels Page Key [C3] : Up/Dn edit of Channels 145-216 (Channels Edit Page 3)
§
Edit Channels Page Key [C4] : Up/Dn edit of Channels 217-288 (Channels Edit Page 4)
In Channels Edit mode the Up, Down, and All keys fade selected channel levels at the rate set by the Scene Fade timer, excepting if the
time is set to Instant, when a four second default fade rate is imposed to prevent obvious errors on stage. Channels which have been
edited by the Up and Down keys over-ride normal playback levels.
1 Press the Channels Edit Page Key [C1]. The Patch display above shows “1-72 P1” indicating that Channels Edit Page 1
mode is on. The Mimic LEDs above the preset faders show live channels. The LCD display if connected changes page to
show the levels of all 288 channels, with the page 1 channels highlighted.
2 Hold [UP], and press any channel flash key: Channels 1-72 will fade up. The Channel and Level display above shows the
edited channel number and level, while the Dimmer display shows ChP1 to indicate you are in Channels Edit mode. The
LCD display marks edited channel levels in Red.
3 Hold [DOWN] and press any channel flash keys: Channels 1-72 will fade down.
4 Hold [ALL], and press [UP] or [DOWN]: all live channels will fade up or down together. When Up, Down or All are
pressed, the Mimic LEDs display all channels which have been edited.
5 Press the Channels Edit Page Keys [C2], [C3], or [C4] to edit the rest of the 288 channel levels. To end Channels Edit
mode, press the same key again so the Channel display is blank. The mimic LEDs and LCD screen revert to normal.
§
For fast identification when plotting, you can also flash up any channel by pressing its flash key.