7
Left Side Motor Mount:
Upper Limit (slot closest to the wall/garage):
Press
the up utto o your re ote. Your u it ill egi to rap arou d the head roll tu e.
To increase your upper limit, turn the limit adjusting tool
COUNTER-CLOCKWISE.
The screen will begin
to travel in the upward direction as you turn the limit adjusting tool.
Stop when the screen is right below the head roll tube.
Your upper limit is set.
To decrease your upper limit, turn the limit adjusting tool
CLOCKWISE.
Lower Limit (slot farthest from the wall/garage):
P
ress the do
utto o your re ote. Your u it ill egi to
lower towards the ground.
To decrease your lower limit, turn the limit adjusting wand
CLOCKWISE
(this will reduce how far away
the screen is from the head roll tube). You will need to turn about 50 times in order for the screen to
be off the ground.
To increase your lower limit, turn the limit adjusting wand
COUNTER-CLOCKWISE.
The screen will
begin to travel in the downward direction.
Continue this process until the screen is at the desired level. When it is fully lowered, the screen should
be tight and the bar
almost
touching the ground, but low enough to stop a hockey puck from sliding
under. When it is fully raised up, the bottom bar should be tucked right below the tube.
Right Side Motor Mount:
Upper Limit (slot closest to the wall/garage):
Press the up utto
on your remote. Your unit will begin to wrap around the head roll tube.
To increase your upper limit, turn the limit adjusting tool
CLOCKWISE.
The screen will begin to travel in
the upward direction as you turn the limit adjusting tool.
Stop when the screen is right below the head roll tube.
Your upper limit is set.
To decrease your upper limit, turn the limit adjusting tool
COUNTER-CLOCKWISE.
Lower Limit (slot farthest from the wall/garage):
Press the do
utto o your re ote. Your u it ill egi
to lower towards the ground.
To decrease your lower limit, turn the limit adjusting wand
COUNTER-CLOCKWISE
(this will reduce how
far away the screen is from the head roll tube). You will need to turn about 50 times in order for the
screen to be off the ground.
To increase your lower limit, turn the limit adjusting wand
CLOCKWISE.
The screen will begin to travel
in the downward direction.
Continue this process until the net is at the desired level. When it is fully lowered, the net should be
tight and the bar
almost
touching the ground, but low enough to stop a hockey puck from sliding
under. When it is fully raised up, the bottom bar should be tucked right below the tube.
