— G8 —
— G9—
Betrieb
Eine CD spielen (Fortsetzung)
11
SKIP (Auslassen):
Gehen Sie ein
Lied vorwärts oder rückwärts,
indem Sie die
Skip
9
/Skip
:
Tasten drücken.
12
REPEAT (wiederholen):
Während
die Musik spielt, drücken Sie einmal
die
PROGRAM/REPEAT
Taste, um
das ausgewählte Lied wiederholt
zu spielen; die Repeat-Anzeige
blinkt dabei auf. Drücken Sie ein
zweites Mal die
PROGRAM/
REPEAT
Taste, um die ganze CD
wiederholt zu spielen; die REPEAT-
Anzeige bleibt dabei an. Drücken
Sie nochmals die Taste, um die
Wiederholungsfunktion zu stoppen,
die REPEAT
Anzeige schaltet aus.
13
PROGRAM:
Sie können bis zu 20
Titel von beliebigen Platten pro-
grammieren, damit diese in einer
bestimmten Reihenfolge spielen.
Im Stopp-Modus, drücken Sie die
PROGRAM/REPEAT
Taste; die
PROGRAM-Anzeige blinkt dabei
und "00" erscheint. Wählen Sie den
ersten Titel aus, indem Sie die
Skip
9
/Skip
:
Tasten verwenden.
Drücken Sie nochmal die
PROGRAM/REPEAT
Taste, um
den Eintrag zu bestätigen. Na-
chdem Sie die gewünschten Titel
ausgewählt haben, erscheint auf
der Anzeige 01, 02, usw. und zeigt
dabei an, dass die ausgewählten
Titel programmiert wurden und die
PROGRAM-Anzeige leuchtet rot
auf. Wiederholen Sie diese Schritte,
um bis zu 20 Titel zu speichern.
Wenn Sie soweit sind, drücken Sie
die
PLAY/PAUSE
Taste, damit die
Musik zu spielen beginnt.
ak
al
am
Betrieb
Eine CD spielen (Fortsetzung)
5
Stellen Sie die Lautstärke auf ein
angenehmes Niveau anhand der
MASTER VOLUME
Regelung.
6
Anschluss von Mikrofon(en), wie auf
Seite E5 abgebildet, und schalten Sie
den
ON/OFF
Schalter des Mikrofons
auf ON.
7
Regeln Sie den
MIC VOLUME
wie
Sie es wünschen. Wenn Sie diese
Einstellung lauter stellen, wird die
Lautstärke beider Mikrofone erhöht.
8
Drehen Sie die
ECHO
Reglung, um
Ihrer Stimme einen Echo-Effekt
hinzuzufügen. Drehen Sie in Richtung
MAX, um den Echo-Effekt stärker zu
stellen.
9
AUTO VOICE CONTROL kann
aktiviert werden, indem Sie den
AVC
Schaltknopf drehen. Je höher dieses
eingestellt ist, umso mehr werden die
Stimmen der multiplexen Aufnahme
gedämpft, wenn der Sänger anfängt,
im Mikrofon zu singen. Wenn der
Sänger aufhört zu singen, werden die
Stimmenaufnahmen der multiplexen
Aufnahme wieder normal hörbar.
10
Drehen Sie die
BALANCE
Reglung
im Uhrzeigersinn, um die Musik
und die Stimmaufnahmen einer
Multiplexen Aufnahme zu hören,
oder gegen den Uhrzeigersinn,
um nur die Musik einer Multiplex-
Aufnahme zu hören.
Anmerkung
: Um die BALANCE-Regelung
zu verwenden, müssen Sie eine CD+G
benutzen, ansonsten funktioniert diese nur
wie eine Standard Balance-Regelung.
U
W
X
V
y
at