— E14 —
— E15—
Operation
Using the AUX IN Jack (Continued)
6
Adjust the
MIC VOLUME
control
as desired. Increasing this control
will increase the volume of both
microphones.
7
Rotate the
ECHO
control to add an echo
effect to your voice. Rotate towards MAX
to increase the echo effect.
8
Adjust the balance between the
speakers using the
BALANCE
control.
9
Press the power
ON/STANBY
button
to turn the unit off.
W
V
X
U
Energy Saving Mode
(Auto Power System-APS)
The unit will automatically enter the Standby mode after 15 minutes in the following
situations:
1. There is no CD in the compartment or the playback of CD has been stopped;
2. The playback of external music player had been stopped but the audio cable is still plug-
gedinto the AUX IN jack;
3. The Bluetooth music has been stopped..
The unit can be resumed to turn on by pressing the
ON/STANDBY
button once.
APS is for energy saving purposes.
Troubleshooting Guide
Should this unit exhibit a problem, check the following before seeking service:
No Power
• Power is not on; press the power
ON/STANBY
button to turn power on.
• Confirm that the AC adapter is connected securely to the back of the unit.
• Connect the unit to a different outlet.
No Sound – General
• Master Volume is set to minimum; raise volume.
• Correct Function was not selected; select using the
FUNCTION
button.
• If using an external device, raise the volume.
.
No Sound – If connected to a TV
• Volume on the TV is muted or too low.
• Correct source (usually AV) was not selected on the TV’s menu.
Lyrics do not appear on the TV screen
• If connected to a TV, Video plug is not connected properly; see page E5.
• If connected to a TV, select the correct source on the TV (usually AV).
• The file/track being played is not a track recording with lyrics. These are the only files
that allow you to view the lyrics on the TV screen.
• Nothing will appear on the TV screen when using AUX IN or Bluetooth.
No sound from the microphone
• Make sure the microphone is firmly connected to the MIC 1 or MIC 2 jack.
• Make sure the
ON/OFF
switch on the microphone is set to the ON position.
• Make sure the
MIC VOLUME
setting is not set too low.
•
MASTER VOLUME
is set to minimum; raise volume.
• Adjust The
Echo
control past the mid point on the Singing Machine.
The Bluetooth device cannot be paired or connected with the unit
• You have not activated the Bluetooth function of your device; see page E11 or refer to
the Bluetooth device user’s manual.
• The system is not in pairing mode; press the
Pair
button to restart pairing.
The Music is not available on the unit after successfully connecting the Bluetooth
• Ensure your Bluetooth device can support the A2DP Bluetooth profile.
• The volume on the external Bluetooth device is set to low or muted; raise as desired.