10/2021 V 1.1
VIEW 31DW
Fixing Holes
09/16
Measure the distance from the ou�de
face of the Return Panel to the nearest
fixing hole on the Inline Panel. Ensure
this measurement is truly horizontal.
Subtract 12mm to get your final
dimension.
Trace the Wall Profile on the door side
wall. Use the Spirit Level against the
Inline Panel to accurately trace the
Profile.
Align the Slider Rail Bracket Template
to the sketch and mark the holes.
Using a Ø6mm high quality drill bit for
a clean and precise hole, drill all holes
and fully insert the wall plugs.
Fix the Slider Wall Bracket in place
using the supplied screws.
x - 12mm
x - 12mm
Mark the final dimension on the Slider
Bar on the fixing hole side.
Cut squarely using a chop saw and
finish the edge.
SLIDER BAR IS STAINLESS STEEL
33
34
35
36
