10/2021 V 1.1
VIEW 31DW
6mm min
Wall Profile
Glass Panel
05/16
Remove the Panels, Wall Profile So�
Seals, and the Wall Profiles.
Trim the Wall Profile.
Use a fine file to remove any burrs. Be
careful not to damage the channel
finish.
Re drill the screws in to the Wall Profile
and remove a�er drilling.
Ensure there is adequate glass in the
Wall Profile. (6mm is recommended)
To centre the panel, add 1mm Packers
on both sides of Return Panel in the
Underframe.
Reinstall the Wall Profiles and Wall
Profile So� Seals.
Add silicone in the corner where the
Wall profile Meets the Underframe at
the back.
Re-install the Glass.
Silicone the
inside corner
17
18
19
20
