04/2021 V 1.0
VIEW 19F
Fix Glass Clamp over the Glass and
attach the Stay Bar to the Wall
Connector with screws provided.
12/14
Position the Stay Bar Connector central
to the marking. Mark the holes for
drilling. Use masking tape on the tiles
to help.
Using a 5mm high quality drill bit for a
clean and precise hole, drill the marked
areas, fully insert the wall plugs and fix
the Connector to the wall.
Professional Tip
If drilling ceramic tiles, place
masking tape on the tiles before
marking and drill through the
tape to prevent the drill bit from
skidding.
DO NOT use Hammer Action as
this will break the tiles.
STAY BAR CONFIGURATION A - SB1
A7
A8
A9
