04/2021 V 1.0
VIEW 19F
Flush
Rigid Seal
Glass Panel
08/14
Apply the Rigid Seal to the dry side of
the Wall Profile starting from the
archway of the Wall Profile up to the
top.
Gently tap the Wall Profile Rigid Seal
into place using a rubber mallet with
the Nylon Block to protect the Glass
and the Wall Profile.
Repeat step 21 and 22 to reinstall and
level the Glass Return Panel.
Pull Return Panel away from the Inline
Panel. Add 1mm Packers to both sides
of Return Panel in the Underframe.
Remove the protective adhesive strip
from the Tape. Gently push the top of
Inline Panel away from Return Panel.
From the bottom, push the Return
Panel towards the Inline Panel.
29
30
31
32
