04/2021 V 1.0
VIEW 19F
WARNING
The glass is heavy and may
damage the
fl
oor or underframe if
handled incorrectly. It is advisable
to use a suitable non-slip
protective mat or piece of carpet.
Never rest the glass across the
underframe as this may cause
damage.
07/14
Trim the Underframe profile using a
chop saw.
If necessary, trim the Wall Profile on
the opposite side of the archway and
repeat step 11 to pre drill the Wall
Profile.
Use a fine file to remove any burrs. Be
careful not to damage the channel
finish.
Remove all tape from the underside of
the Underframe. Carefully place the
Underframe back into position. Ensure
that the trimmed end is butted up
against the wall.
Place the Underframe Gasket back into
the Underframe. Trim excess Gasket.
Carefully reinstall the vertical Wall
Profile, Wall Profile Soft Seal and Inline
Glass Panel.
To centre the Inline Panel, add 1mm
Packers on both sides of the Inline
Panel in the Underframe.
25
26
27
28
