10/2021 V 1.1
VIEW 19.3H
Flush
Rigid Seal
Glass Panel
08/16
Apply the Rigid Seal to the dry side of
the Wall Profile star�ng from the
archway of the Wall Profile up to the
top.
Gently tap the Wall Profile Rigid Seal
into place using a rubber mallet with
the Nylon Block to protect the Glass
and the Wall Profile.
Repeat step 21 and 22 to reinstall and
level the Glass Inline Panel.
Pull Inline Panel away from the Return
Panel. Add 1mm Packers to both sides
of Inline Panel in the Underframe.
Remove the protec�ve adhesive strip
from the Tape. Gently push the top of
Return Panel away from Inline Panel.
From the bo�om, push the Inline Panel
towards the Return Panel.
29
30
31
32
