Using a pencil, mark the holes where
the 90° glass to wall brackets will be
a�ached.
Use masking tape on the wall to mark
your measurements.
Leaving the brackets on the panel, li�
the glass out and put to one side.
Note and leave the spacers in the
base channel.
9
10
11
12
Using a straight edge, mark where both
wall and base channels need to be
trimmed.
To protect the channel finish, it is
recommended to mark on masking
tape.
03/12
Check there are no spacers stuck
underneath the panel.
4mm
4mm
Spacer
View 01
07/2019 V 2.2
