The RITE Door D3676, Руководство пользователя

Страница: 2 / 10

Owner's Manual
Entry Trim Operation
The 3080 series outside entry trim is an available option with The RITE Door
®
. The entry trim will activate the locking
mechanism with any downward or upward motion of the lever handle. The trim utilizes a clutching mechanism that
protects the lever from forced entry or vandalism. The trim will accept any standard mortise cylinder (1" – 1 ½" long)
with an MS cam if re-keying or new cylinders are required. Spacer rings may be needed to accommodate longer
cylinders. The number of spacers will vary depending on the length of cylinder being used. Maintenance of the trim
will be discussed later in this manual.
Recommended Maintenance
Exit Devices are designed for life safety first. Adams Rite devices are cycle tested in excess of one million cycles, both
as prototypes during design and as quality samples during production. Atmospheric and other localized conditions
may vary greatly, but extremely dirty, salty or abrasive situations could require service attention such as cleaning
and lubrication of moving parts from time to time to assure reliability. Service personnel should be reminded that life
safety is the goal.
Some simple maintenance procedures can be taken to keep the exit device and trim in good working condition.
- Maintaining the correct positioning and tightening of screws on top actuator.
- Lubrication of top actuator from time to time with a high grade, lithium based grease. Moving parts inside the
device and rods can also be sprayed annually with white silicone grease to assure reliability.
- Tightening of pushbar and entry trim screws.
- Tightening of end cap screws.
- Tightening of top strike post.
*** Please note that reliable RITE Door
®
operation is dependant upon the frame being square and plumb to function
correctly. The diagram below will give you an idea of how to tell if your frame is set properly.