NEVER LEAVE MACHINE RUNNING UNATTENDED -
Turn Power Off. Do not leave the
machine unattended until it has come to a complete stop.
DO NOT USE PRODUCT IF SWITCH DOES NOT TURN IT OFF. -
Have defective switches
replaced by an authorised service dealer.
MAINTAIN YOUR MACHINE WITH CARE -
Clean the machine immediately after use. Keep
the machine clean to ensure it operates to its full and safest performance. When
maintaining this machine, only the manufacturer’s original replacement parts should be
used. The use of non-original manufacturer parts may invalidate your warranty.
PROTECT THE ENVIRONMENT -
Take left over materials to an authorised collection point
or follow the stipulations in the country where the machine is used. Do not discharge into
drains, soil or water.
STORE IDLE EQUIPMENT -
When not in use, the machine should be stored in a dry location.
Keep the machine away from children and others not qualified to use it.
ONLY USE APPROVED REPLACEMENT PARTS -
Only use approved replacement parts.
Unauthorised replacement parts can cause damage to the machine and invalidate your
warranty.
RESIDUAL RISK -
Even with the intended use of the appliance there is always a residual risk,
which cannot be prevented. Common sense is the responsibility of the user and not the
manufacturer.
ELECTRICAL CONNECTION
Do not connect either core to the earth pin
The insulation on the grounded three metre electrical cord will only remain effective if the
original insulating parts are used for repairs and the spaces between the original insulation
are maintained.
The use of a Residual Current Device (“RCD”), on 230V electrics is recommended. If using an
extension cable, plug it directly into the RCD.
DOUBLE INSULATION
Double insulation is a concept in safety in electric power tools, which eliminates the need
for the usual three-wire grounded power cord. All exposed metal parts are isolated from the
internal metal motor components with protecting insulation. Double insulated products do
not need to be grounded.
WARNING
The double insulated system is intended to protect the user from shock resulting from a
break in the product’s internal insulation. Observe all normal safety precautions to avoid
electrical shock.
Содержание THHPWVAC
Страница 2: ......
Страница 30: ...PARTS DIAGRAM 29 15 25 14 2 24 19 1 20 10 4 7 8 17 16 26 9 33 31 32 11 6 5 18 21 12 3 30 28 23 22 13 27 ...
Страница 35: ......