The Handy THHPWVAC, Руководство оператора и список запчастей

Страница: 25 / 36

ASSEMBLY – WET & DRY VACCUM
CONNECTION OF THE HOSE WITH THE VACUUM CLEANER
Insert one end of the hose into the air inlet of the vacuum cleaner for vacuuming. To use the
unit as a blower instead insert one end of the hose into the blower port
If you want to take the hose off, pull to remove it from the air inlet or blower port.
CONNECTION OF HOSE WITH ACCESSORIES
First connect the hose to the unit, next attached the desired accessory to the available hose
end.
ASSEMBLING AND DISMANTLING OF THE TANK
Unlatch both the front & rear latches of the motor housing from the tank, then pull up on
the handle of the unit.
ASSEMBLY OR REMOVAL OF THE FILTER
Fit the filter over the float cage & secure with the retainer band. To remove, first remove
the retainer band, then remove the filter from covering the float cage.
IMPORTANT:
Make sure the filter is completely covering the filter cage; there are no gaps
between the filter & the lid. It is very important to assemble the filter properly to reduce the
risks of leaks and possible damage to the vacuum.