Page 8
HINTS AND TIPS
Wood Chipping:
• Long branches such as tall flower stems or branches should be fed into the side chip
-
ping chute for chipping by the rotating blade.
•
Some side shoots may have to be trimmed from the main branch before feeding.
•
Short stubby branches can be pushed through the chipper section using the next
longer branch -
never
use your hands.
•
Similarly push the last branch through using a wooden stick to guide,
not
your hand
s
.
•
Feed larger branches slowly and observe the maximum diameter of 50mm/20in.
•
Do not allow a build-up of shreddings/chipping to accrue underneath the shredder. It
may interfere with the discharge chute.
•
Always use wooden tools to clear any blockage, not metal or
your
hands!
Leaves and Grass Shredding:
•
Do not open the plastic cover when adding more material.
• Leaves and grass will be difficult to feed automatically into the hopper - use a wooden
stick to push in -
not
your hands!
•
Do
not
lean over the hopper in case any material flies back out.
•
The shredder is more likely to block up if the material is wet or full of sap. Leave fresh
prunings for a day or two to allow t
hem to
dry out before shredding.
Correct
Incorrect
Correct
Incorrect
Содержание THCS-65
Страница 9: ...Page 10 PARTS DIAGRAM ...