Page 5
ASSEMBLY
•
Unpack and check the contents. Some of the parts may be stored inside the hopper. Undo
the two Phillips screws to access them, then replace and tighten the screws to secure the
hopper cover.
•
Assemble the shredder on a clean level surface - it is easier if there are two people.
•
Remove the machine from the crate and place on a sturdy support as shown in Fig 1.
•
Referring to Fig 2, attach the front foot to the machine.
•
Remove the nuts from bolt
s
1 and 2; remove the bolts and pipe spacer.
•
Align the discharge hopper to holes 1 and 2.
•
Attach front foot 5 to the side and align the mounting holes 1 and 2.
•
Put the pipe spacer back in place.
•
Insert the bolts and secure tightly with nuts and washers.
Fig 1
Fig 2
Содержание THCS-65
Страница 9: ...Page 10 PARTS DIAGRAM ...
