The Handy 1938139001, Инструкция по эксплуатации

Страница: 9 / 24

SET UP & PREPARATION FOR OPERATION
STEP 1
Pull Spring Pin (A) to remove Lock Pin (B).
Apply a thin coat of grease to both surfaces of
the Control Lever Guard as shown.
Insert Control Lever & Guard Assembly, ensure
the Control Lever End fixes into the slot of the
Connection Bracket (C).
Lock the Control Lever and Guard Assembly
down with the Lock Pin (B) and Spring Pin (A).
Repeat on the other side.
STEP 2
Three positions are available for the Support
Table for different splitting lengths.
At every position, Lock Down Hocks (D) are
fitted to the frame.
Insert the Support Table in the required
brackets (E).
Turn the Lock Down Hooks (D) 90 degrees to
secure the table.
STEP 3
Familiarise yourself with the controls and
features of this log splitter in the illustrations.
1. Transport Handle
2. Ram Travel Adjusting Rod
3. Splitting Wedge
4. Ram
5. Plug & Switch Assembly
6. Control Levers Connection Bracket
7. Top Motor Shield
8. Motor
9. Support Table Side Bracket
10. Table Lock Down Hook
11. Base Cover
12. Wheel
13. Base
14. Oil Tank Cover/Bleed Screw
15. Support Table Front Bracket
16. Control Lever Guard
17. Adjustable Log Holder
18. Log Holder Adjusting Knob